home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Format CD 38
/
Amiga Format CD38 (1999-03-15)(Future Publishing)(GB)(Track 1 of 3)[!][issue 1999-04].iso
/
-seriously_amiga-
/
hardware
/
ioblixz2usr376
/
ioblixz2usr376.lha
/
Install Parallel ZIP
< prev
next >
Wrap
Text File
|
1998-11-09
|
5KB
|
182 lines
;
; $VER: IOBlix parallel port zip installation 1.4 (9.11.98)
;
; Copyright (c) 1998 Thore Böckelmann and RBM Computertechnik
;
;****************************************************************************
;
; English texts
;
(if (not (= @language "deutsch"))
(
(set #bad-kick "You must have AmigaOS 2.0 (V37) or newer to be able to use the IOBlix I/O board.")
(set #bad-cpu "You must have at least an MC68020 to use the IOBlix software.")
(set #noioblix (cat "You have no IOBlix board installed! "
"Please install the board first, before you install the software!"))
(set #intro (cat "\n"
"Now you can install the necessary drivers for a ZIP drive connected to IOBlix' parallel port."
"Drivers for FFS- and PC-formatted ZIP disks will be installed."
"\n"
"\n"
"Do you want to install the drivers now?"))
(set #selectdevs "\nWhere to install the device drivers?\n")
(set #copyzipdev "\nCopying ioblixzip.device...\n")
(set #copydosdriver "\nCopying DOSDrivers...\n")
(set #zipquery (cat "Do want to install drivers for a "
"parallel port ZIP drive?"))
(set #zipstart "Do you want the ZIP driver to be started on bootup?")
(set #zipinfo (cat "The driver PZIP0: is meant for FFS formatted ZIP disks with 512 bytes blocksize,\n"
"and the driver PZIPC: is meant for PC formatted ZIP disks. This requires CrossDOS to be installed."))
)
)
;****************************************************************************
;
; Deutsche Texte
;
(if (= @language "deutsch")
(
(set #bad-kick "Sie müssen AmigaOS 2.0 (V37) oder höher installieren, um die IOBlix-Karte zu benutzen.")
(set #bad-cpu "Sie brauchen mindestens einen MC68020, um die IOBlix-Software zu benutzen.")
(set #noioblix (cat "Sie haben keineIOBlix-Karte in Ihrem Rechner installiert! "
"Bitte bauen Sie erst die Karte ein, bevor Sie die Software installieren!"))
(set #intro (cat "\n"
"Sie können jetzt die nötigen Treiber für ein ZIP Laufwerk am Parallelport der IOBlix-Karte "
"installieren. Es werden Treiber für FFS- und PC-formatierte Medien installiert."
"\n"
"\n"
"Wollen Sie die Treiber jetzt installieren?"))
(set #selectdevs "\nWohin sollen die Gerätetreiber kopiert werden?\n")
(set #copyzipdev "\nKopiere ioblixzip.device...\n")
(set #copydosdriver "\nKopiere DOSDrivers...\n")
(set #zipquery (cat "\n"
"Wollen Sie Treiber für ein Parallel-Port ZIP Laufwerk installieren?"))
(set #zipstart "Soll der ZIP Treiber gleich beim Booten gestartet werden?")
(set #zipinfo (cat "Der Treiber PZIP0: ist für FFS-formatierte ZIP-Medien mit einer Blockgröße von 512 Bytes gedacht,\n"
"und der Treiber PZIPC: for PC-formatierte ZIP-Medien. Dafür muß CrossDOS installiert sein."))
)
)
;****************************************************************************
;
; Setup
;
(complete 0)
(if (< (/ (getversion) 65536) 37)
(abort #bad-kick)
)
(if (patmatch "68000|68010" (database "cpu"))
(abort #bad-cpu)
)
;****************************************************************************
;
; Welcome
;
(welcome)
(complete 10)
;****************************************************************************
;
; Check for IOBlix board
;
(run "IOBlix-Install:C/english/SetupIOBlix reinit" (safe))
(if
(= 0
(run "IOBlix-Install:C/Look4IOBlix" (safe))
)
(abort #noioblix)
)
(complete 20)
;****************************************************************************
;
;
;
(set #doit
(askbool
(prompt #intro)
(help @askbool-help)
(default 1)
)
)
(if (= 0 #doit)
(
exit (quiet)
)
)
;****************************************************************************
;
; Setup directory
;
(complete 30)
(set #destdevs
(askdir
(prompt #selectdevs)
(help @askdir-help)
(default "DEVS:")
)
)
;****************************************************************************
;
; Install devices
;
(copylib
(help @copylib-help)
(prompt #copypardev)
(source "devs/ioblixzip.device")
(dest #destdevs)
(confirm)
)
(complete 60)
(copyfiles
(help @copyfiles-help)
(prompt #copydosdriver)
(source "DEVS/DOSDrivers")
(choices "PZIP0" "PZIPC")
(dest "SYS:Storage/DOSDrivers")
(infos)
(confirm)
)
;****************************************************************************
;
;
;
(startup "IOBlix ZIP driver"
(help @startup-help)
(prompt #zipstart)
(command "mount PZIP0: >nil:")
)
(complete 90)
(message #zipinfo)
;****************************************************************************
;
; Exit
;
(complete 100)
(exit)